$369.95
Dinan High-Flow Intake – 2020-2024 MINI Cooper S/JCW & C’man S
Dinan High-Flow Intake – 2020-2023 BMW X1/X2 28i
Carbon Fiber – F39/F48/F54/F55/F56/F57/F60
Dinan’s highly successful 3rd generation MINI intake has been tweaked and a new variant engineered that supports LCI models as well as 2020+ F48/F39 BMW X1/X2’s!
Like its predecessor the Dinan carbon fiber intake for the MINI/BMW transverse B46/B48 engines is tantamount to an exercise in efficiency. Given a confined space with limited options and an even smaller budget, create an intake that provides power, sound, and throttle response in an aesthetically pleasing package. While not the easiest of things to accomplish, we embarked upon the task with our team of engineers determined to provide a solution.
Through a bevy of flow bench testing, it was quickly determined that the biggest hindrance to improved flow on the stock intake was the factory snorkel. Unfortunately, the snorkel was also the piece that would cause the largest increase in cost to a potential kit. As a result, it was quickly abandoned as a potential area of improvement. Instead, attention was turned to finding a way to introduce a secondary inlet for additional airflow. With limited room to work with, traditional secondary ducting was not possible. This, in turn, led to multiple experiments being conducted on the effectiveness of a possible open-air inlet on the upper lid. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where lots of overheated engine bay air is utilized in the intake tract. The results of these tests showed that a 12 square-inch opening for additional air on the opposite side of the upper lid from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.).
With more air being pulled into the system, throttle response is improved, and additional power is realized in the form of maximum gains of +12 WHP / +23 ft-lbs of torque in the low/mid-range. The secondary air inlet also allows the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan’s traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the system is made of immaculate carbon fiber, so it looks the role as well. The result of an optimized lid, an improved filter, and thorough testing, yields an incredibly efficient and cost-effective solution that you will be hard-pressed to beat.
Brand | Dinan |
---|---|
Dinan Point Value | 3 |
Emission Code | 7 |
Labor Time (Hours) | 1 |
Max HP Gain | 12 @ 3500 RPM |
Max Torque (lb-ft) Gain | 23 @ 2000 RPM |
Product Type | Cold Air Intake |
Warranty | Dinan Factory Matching (4yr/50k) Warranty |
UPC | 813725029795 |
Part Number | D760-0057 |
7
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Dinan Replacement Filter for High Flow Carbon Fiber Intake – 2014-2021 BMW M3/M4 and 2015-2024 MINI
Instructions – D760-0057_R2.pdf
Please verify MAF housing before purchase. Not compatible with Pre-LCI MINI’s (<2019/2020 MY with oval MAF sensor housing). If you have an oval MAF sensor housing use SKU D760-0051. Also not compatible with B48E MINI’s (2020+ Countryman/Clubman JCW’s)
Dinan Factory Matching (4yr/50k) Warranty: See Details
2024 MINI COOPER John Cooper Works /2.0L L4 Convertible
2024 MINI COOPER John Cooper Works /2.0L L4 Hatchback
2024 MINI COOPER S /2.0L L4 Convertible
2024 MINI COOPER S /2.0L L4 Hatchback
2024 MINI COOPER CLUBMAN S /2.0L L4 Wagon
2024 MINI COOPER CLUBMAN S ALL4 /2.0L L4 Wagon
2024 MINI COOPER COUNTRYMAN S /2.0L L4 Hatchback
2024 MINI COOPER COUNTRYMAN S ALL4 /2.0L L4 Hatchback
2023 MINI COOPER John Cooper Works /2.0L L4 Hatchback
2023 MINI COOPER John Cooper Works /2.0L L4 Convertible
2023 MINI COOPER S /2.0L L4 Hatchback
2023 MINI COOPER S /2.0L L4 Convertible
2023 MINI COOPER CLUBMAN S /2.0L L4 Wagon
2023 MINI COOPER CLUBMAN S ALL4 /2.0L L4 Wagon
2023 MINI COOPER COUNTRYMAN S /2.0L L4 Hatchback
2023 MINI COOPER COUNTRYMAN S ALL4 /2.0L L4 Hatchback
2023 BMW X2 sDrive28i /2.0L L4 Sport Utility
2023 BMW X2 xDrive28i /2.0L L4 Sport Utility
2022 MINI COOPER John Cooper Works /2.0L L4 Hatchback
2022 MINI COOPER John Cooper Works /2.0L L4 Convertible
2022 MINI COOPER S /2.0L L4 Hatchback
2022 MINI COOPER S /2.0L L4 Convertible
2022 MINI COOPER COUNTRYMAN S /2.0L L4 Hatchback
2022 MINI COOPER COUNTRYMAN S ALL4 /2.0L L4 Hatchback
2022 MINI COOPER CLUBMAN S /2.0L L4 Wagon
2022 MINI COOPER CLUBMAN S ALL4 /2.0L L4 Wagon
2022 BMW X1 sDrive28i /2.0L L4 Sport Utility
2022 BMW X1 xDrive28i /2.0L L4 Sport Utility
2022 BMW X2 sDrive28i /2.0L L4 Sport Utility
2022 BMW X2 xDrive28i /2.0L L4 Sport Utility
2021 MINI COOPER John Cooper Works /2.0L L4 Hatchback
2021 MINI COOPER John Cooper Works /2.0L L4 Convertible
2021 MINI COOPER S /2.0L L4 Hatchback
2021 MINI COOPER S /2.0L L4 Convertible
2021 MINI COOPER COUNTRYMAN S /2.0L L4 Hatchback
2021 MINI COOPER COUNTRYMAN S ALL4 /2.0L L4 Hatchback
2021 MINI COOPER CLUBMAN S /2.0L L4 Wagon
2021 MINI COOPER CLUBMAN S ALL4 /2.0L L4 Wagon
2021 BMW X1 sDrive28i /2.0L L4 Sport Utility
2021 BMW X1 xDrive28i /2.0L L4 Sport Utility
2021 BMW X2 sDrive28i /2.0L L4 Sport Utility
2021 BMW X2 xDrive28i /2.0L L4 Sport Utility
2020 MINI COOPER John Cooper Works /2.0L L4 Hatchback
2020 MINI COOPER John Cooper Works /2.0L L4 Convertible
2020 MINI COOPER S /2.0L L4 Hatchback
2020 MINI COOPER S /2.0L L4 Convertible
2020 MINI COOPER COUNTRYMAN S /2.0L L4 Hatchback
2020 MINI COOPER COUNTRYMAN S ALL4 /2.0L L4 Hatchback
2020 MINI COOPER CLUBMAN S /2.0L L4 Wagon
2020 MINI COOPER CLUBMAN S ALL4 /2.0L L4 Wagon
2020 BMW X1 sDrive28i /2.0L L4 Sport Utility
2020 BMW X1 xDrive28i /2.0L L4 Sport Utility
2020 BMW X2 sDrive28i /2.0L L4 Sport Utility
2020 BMW X2 xDrive28i /2.0L L4 Sport Utility
Stock Tuning – Stock CAI vs Dinan CAI – 93 Octane
Power and Torque at the Wheel
Power and Torque at the Crank
Brand | Dinan |
---|---|
Emission Code | 7 |
Max HP Gain | 12 @ 3500 RPM |
Max Torque (lb-ft) Gain | 23 @ 2000 RPM |
Out of stock
$1,119.98 Read moreOut of stock
$1,999.95 Read moreDesigned and developed by Altometatron Web Solutions
Copyright © 2025 OnlyBMW
Reviews
There are no reviews yet.