Dinan High Flow Air Intake – 2009-2012 BMW 750i

Overview

The Dinan carbon fiber intake looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers. Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet. The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow. The filtered air passes from the inlets into the black powder-coated ducts then directly into the engine.

The Dinan Engineering team had a special challenge with the F01/F02 750i. With very little room to work with under the hood, the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part. The results are beautiful and purposeful looking.

Features:

• More Power: + 10 HP, + 8 LB-FT (coupled w/ engine software)
• Beautiful dual carbon fiber inlets
• Sealed system for maximum insulation from power robbing heat
• Additional secondary inlets for additional air flow
• Stock system stays completely functional
• Integrated strut tower brace for added structural stiffness

Specs

Service Parts

Replacement Air Filter for CF High Flow Air Intake – 2011-2016 BMW 550i and 2008-2015 BMW 750i/B7

Emissions

7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Tech Resources

Instructions for Part# D760-0033

Specialized Dinan tool kit required for installation (DT763-0084).

Applications

2009-2012 BMW 750I Base 4.4L V8 A6HP26Z Sedan
2010-2012 BMW 750I XDRIVE Base 4.4L V8 A6HP26Z Sedan
2009-2012 BMW 750LI Base 4.4L V8 A6HP26Z Sedan
2011-2012 BMW 750LI XDRIVE Base 4.4L V8 GA6HP26Z Sedan
2011-2012 BMW 750LI XDRIVE Base 4.4L V8 GA8HP70Z Sedan
2010 BMW 750LI XDRIVE Base 4.4L V8 A6HP26Z Sedan
2011-2012 BMW ALPINA B7 Base 4.4L V8 A6HP26Z Sedan
2011-2012 BMW ALPINA B7 XDRIVE Base 4.4L V8 A6HP26Z Sedan
2011-2012 BMW ALPINA B7L Base 4.4L V8 A6HP26Z Sedan
2011-2012 BMW ALPINA B7L XDRIVE Base 4.4L V8 A6HP26Z Sedan