Dinan High-Flow Intake – 2014-2019 MINI Cooper/Clubman/Countryman and 2016-2020 BMW X1/X2

Original price was: $416.95.Current price is: $332.96.

SKU D760-0051 Category Brand:

Dinan High-Flow Intake – 2014-2019 MINI Cooper/Clubman/Countryman
Dinan High-Flow Intake – 2016-2020 BMW X1/X2

Carbon Fiber – F39/F48/F54/F55/F56/F57/F60

Overview

The Dinan carbon fiber intake for the MINI B46/B48 engines (as well as the BMW F48 X1 and F39 X2) is tantamount to an exercise in efficiency. Given a confined space with limited options and an even smaller budget, create an intake that provides power, sound, and throttle response in an aesthetically pleasing package. While not the easiest of things to accomplish, we embarked upon the task with our team of engineers determined to provide a solution.

Through a bevy of flow bench testing, it was quickly determined that the biggest hindrance to improved flow on the stock intake was the factory snorkel. Unfortunately, the snorkel also was the piece that would cause the largest increase in cost to a potential kit. As a result, it was quickly abandoned as a potential area of improvement. Instead, attention was turned to finding a way to introduce a secondary inlet for additional airflow. With limited room to work with, traditional secondary ducting was not possible. This, in turn, led to multiple experiments being conducted on the effectiveness of a possible open-air inlet on the upper lid. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where lots of overheated engine bay air is utilized in the intake tract. The results of these tests showed that a 12 square-inch opening for additional air on the opposite side of the upper lid from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.).

With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +5 HP / +5 ft-lbs of torque. The secondary air inlet also allows the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan’s traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the system is made of immaculate carbon fiber so it looks the role as well. The end result of an optimized lid, an improved filter, and thorough testing, yields an incredibly efficient and cost-effective solution that you will be hard-pressed to beat.

Features:

  • More Power: Max gains of 5 HP and 5 lb-ft of torque @ 5000 RPM
  • Enjoyably louder, sportier sound
  • Improved throttle response
  • Large carbon fiber air box lid allows increased volume of air to be utilized taking advantage of the free flowing filter
  • Bell-mouthed side inlet creates a secondary air intake source with optimal flow characteristics and no increase in intake air temperature
  • Bolt-On Installation

Specs

Brand Dinan
Category Air and Fuel Delivery
Dinan Point Value 3
Emission Code 7
Height 10
Labor Time (Hours) 1
Length 14
Max HP Gain 5 @ 5000 RPM
Max Torque (lb-ft) Gain 5 @ 5000 RPM
Part Type Air Intake Kit
Product Type Cold Air Intake
Sub Category Service Kits
Weight 5
Width 14
UPC 813725025155
Part Number D760-0051

Service Parts

Dinan Replacement Filter for High Flow Carbon Fiber Intake – 2014-2021 BMW M3/M4 and 2015-2024 MINI
F39/F48/F54/F55/F56/F57/F60/F80/F82
Part# D401-0022

Emissions

7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Tech Resources

Instructions – D760-0051_R3.pdf

Not compatible with LCI MINI’s (~2019/2020+ MY with non-oval MAF sensor housing).

Applications

MINI COOPER
2014-2019 MINI COOPER S /2.0L L4 Hatchback
2016-2019 MINI COOPER S /2.0L L4 Convertible
2015-2019 MINI COOPER John Cooper Works /2.0L L4 Hatchback
2016-2019 MINI COOPER John Cooper Works /2.0L L4 Convertible
2016-2019 MINI COOPER CLUBMAN S /2.0L L4 Wagon
2017-2019 MINI COOPER CLUBMAN S ALL4 /2.0L L4 Wagon
2017-2019 MINI COOPER CLUBMAN John Cooper Works ALL4 /2.0L L4 Wagon
2017-2019 MINI COOPER COUNTRYMAN S /2.0L L4 Hatchback
2017-2019 MINI COOPER COUNTRYMAN S ALL4 /2.0L L4 Hatchback
2018-2019 MINI COOPER COUNTRYMAN John Cooper Works ALL4 /2.0L L4 Hatchback

BMW
2016-2020 BMW X1 xDrive28i /2.0L L4 Sport Utility
2017-2020 BMW X1 sDrive28i /2.0L L4 Sport Utility
2018-2020 BMW X2 sDrive28i /2.0L L4 Sport Utility
2018-2020 BMW X2 xDrive28i /2.0L L4 Sport Utility

Additional information

Weight 5 lbs
Dimensions 14 × 14 × 10 in
Brand

Dinan

Emission Code

7

Max HP Gain

5 @ 5000 RPM

Max Torque (lb-ft) Gain

5 @ 5000 RPM

Reviews

There are no reviews yet.

Be the first to review “Dinan High-Flow Intake – 2014-2019 MINI Cooper/Clubman/Countryman and 2016-2020 BMW X1/X2”

Your email address will not be published. Required fields are marked *